Simple.TV

Woot!  Woot!  I got a Simple.TV on Woot last week for $105 (shipped).  I have been intrigued by the Simple device since it was offered on KickStarter.  At $100 including lifetime Premier Service, I jumped in.  My logic was that I was getting the tuner for free since the Premier lifetime license was $150.  This is particularly attractive since Simple has promised the license will support their v2 device and that the v2 device would be compatible with legacy hardware.  From their FAQ

Rest assured whether you buy a unit today or upgrade to a new unit a year from now, we won’t charge you extra for the subscription. Every Simple.TV subscription can accommodate new units as long as you have a valid Simple.TV subscription.

We believe in value and we don’t nickel and dime you to death. Our subscriptions are tied to you (the viewer) and you can choose to have one unit or many units on your account. As long as you’re the primary subscriber, you can have as many units as you wish.

Since our subscriptions can cover multiple units, you can get started with us today and upgrade your Simple.TV unit at anytime in the future — risk free.

What is Simple?  According to the manufacturer, “Simple.TV is the first personal DVR that streams live and recorded TV to your favorite devices, wherever you are. Get all your broadcast TV favorites on your iPad, PC, Mac or Roku box.”  That pretty much sums it up.

What they do not say, however, is that the Simple completes the Roku.  If you have a Roku and are missing local programming and/or your DVR, Simple is what you need.  Look at this…

wholehouse_small

Instead of routing your broadcast signal to each television, feed the signal into a bank of Simples and stream programming to Rokus.

You will want one Simple and one Roku for each television plus one Simple to serve as a whole house DVR since the Simple serves as a tv tuner for the Roku.    Of course, any/every Simple can be a DVR, so designating a lesser used tuner (guest room) is fine.  In this configuration, you can schedule favorite shows to record with the Premier software.  It will record only new shows or new shows plus reruns.  Either way, it will not re-record an episode already saved.  From your Roku equipped television, you can pause, rewind, fast forward, and record live television.  You can watch shows recorded on any Simple device on your network.  You can do all of this on the road as well (I haven’t tried this yet).

So, that is the concept.  How does it work?

Let’s start with the DVR.  Before connecting anything, you need to set up an account using the provided code.  Then you plug in a USB disk, an ethernet cable, an antenna, and power.  The web app will discover the DVR, prompt you for local information, and set up your guide.  It will offer to format the USB disk.  Once the disk is formatted, you are ready to begin watching live tv via the web interface and schedule recordings.

dvrScreens

DVR Screens

dvrScreens2

 

Roku Channel Screens

Setting up the Roku channel is even easier.  Install the private channel.  Open the channel, type the code into https://www.simple.tv/roku and you’re done.  The Roku channel is about an [un]impressive as any Roku channel — simple drill down navigation with 2D scrollers, limited search and programming — but it works and some of the screens like ‘upcoming’ are pretty nice.  They key missing features are…

  1. Device oriented
  2. No play all in My Shows
  3. No search for programs to record
  4. No slow motion
  5. Limited record functions

By device oriented, I mean that you have to select a DVR in the Roku menu before you can use it to tune channels or watch a show.  If you save programs on multiple DVRs, you need to know which one recorded the show you want to watch.  If you connect to a DVR that is currently recording a show or on which someone else is already watching television, your connection will interrupt the current activity.

One other shortcoming is that the Live TV list is a list of programs not channels, so if you have the same program on a strong and a weak channel, you may not be able to select the strong channel.

Some Roku channels have an option to record all programs.  The Simple pops out to the show description upon completion.  Search is limited to shows on the DVR.  Via the Roku channel, recording options are limited to record this episode and record the series.

My ideal Roku channel would be device independent.  If I wanted to watch live tv, the first available DVR would be connected.  The Live TV list should include all tuned channels even if the same show is on two channels. Recordings should start on the next available tuner.  When I choose to watch live tv, if a tuner is already in use, I should be prompted before it is disconnected (this tuner is recording the Super Bowl, do you want to interrupt the recording?)  I should be able to search programs on all local DVRs.  When I choose to watch a show, an option ought to be to watch all recorded episodes.  I’d also like to be able to start and stop recording manually or record channel 38 from 6pm to 8pm every week night.  I’d like to be able to rewind something and watch it in slow motion.  This is essential for sports and wardrobe malfunctions.

Let’s think through some use cases…

  • You cut the cable and installed an antenna and have run cable to your televisions and are enjoying broadcast programming.  You have installed a Roku for Netflix and other internet programming.  You might install one or a few Simple devices to record programs and to use to view, pause, rewind, and fast forward for some programs.
  • You want to put a tv where you have no coax and do not want to run coax.  You install a Simple DVR where there is coax and stream wirelessly to a Roku where the television is.
  • You want to watch tv by the pool or on the deck.  Simple can stream to a laptop, a tablet, or a wireless Roku by the pool.
  • I have five DTVPal DVRs scattered throughout my home.  We also have five Rokus.  We just installed our first Simple DVR.  I program it to record shows we like and we watch them using the Roku channel.  Five Rokus can stream a program at the same time.  This is a great way to intelligently record programming without spending for a Tivo.

I’ve only had this for a couple weeks and I love it.  I’ll post a followup once I have had a chance to use it for remote viewing (college boy is supposed to test this for me).  In the meantime, I strongly recommend anyone watching unencrypted cable or broadcast television grab one of these.  Watch Woot — these have been $100 with lifetime twice.  In case you missed the link in the first paragraph, here is a big on to the specs on the v2 device…

http://www.silicondust.com/images/hdhomerun/stv_sellsheet_2013USA.pdf

 

Advertisements

5 comments on “Simple.TV

  1. Thanks for the nice write-up. Regarding watching SimpleTV content on the Roku, how do you like the remote control responsiveness and functionality? If you’re used to a TiVo, does it come close to the FF and 8-sec back functionality of the TiVo remote?
    Thanks

    • I’ve never used a Tivo. The Roku has fast forward, rewind, and jog buttons. i don’t really care for ff and rew functions as they are blind. The jog button seems to jump back about eight to ten seconds.

      I’m very happy with the performance on the DVR via my Roku.

  2. Pingback: Simply Awesome! | The Beer's on COMCAST!

  3. They are long on talk and short on results. Best hold off until everything they say matches 50% of what they can do. So far every time I use mine I have buyers remorse. When it goes wonky and doesn’t record a show, or decides to start recording reruns even if it’s set not to. Etc etc. Maybe V2 will work better but can’t understand why I would upgrade something that is only a big fat paperweight. I’ll admit that after the first year of the Roku channel saying “Beta” they did come out with updates to the firmware and the channel. These have helped but not cured the issues. For example the latest update to the channel has no way to resume watching a partly watched show. So hope you life FF with only a time bar as your guide. It’s just not worth the money plus I don’t see how it could work without a subscription to their “service” since you have to use guide their guide the record anything. There is as of yet not option the record x time on x channel. So you better hope that you don’t get left out in the cold after the company fold up. You won’t be able to use the box for anything.

    It only records OTA broadcasts and unencrypted or “Clear-Qam” which does exist but you’ll never find it. There is one regional cable company in Illinois, I think. So hope you like PBS and Judge Judy. Not that there is that much on cable anymore either.

    I have found it works better if you reboot the device once a week. Recorded almost human fine first 4 weeks then took a week off. You can tell when this happens because the “Scheduled recordings” starts to show air dates from the past. Or zombie shows. Only way to fix it is a reboot. Which can only be done two ways, through the web interface or by unplugging it.

  4. Pingback: Simple TV DVR | Simple TV for Dummies

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s